"> AR# 34393: MIG Virtex-6 DDR2/DDR3 - Performance


We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 34393

MIG Virtex-6 DDR2/DDR3 - Performance


This section of the MIG Design Assistant focuses on the performance of the Virtex-6 DDR3/DDR2 designs. Please select from the below options to find information related to your specific question.

Note: This Answer Record is a part of the Xilinx MIG Solution Center (Xilinx Answer 34243). The Xilinx MIG Solution Center is available to address all questions related to MIG. Whether you are starting a new design with MIG or troubleshooting a problem, use the MIG Solution Center to guide you to the right information.


For information on frequency support for MIG Virtex-6 DDR3/DDR2 design, please see:
(Xilinx Answer 34391)- Frequency Support

For information on the read latency for MIG Virtex-6 DDR3/DDR2 design, please see:
(Xilinx Answer 35793)- Read Latency

For information on the efficiency of MIG Virtex-6 DDR3/DDR2 design, please see:
(Xilinx Answer 34392)- Efficiency

Linked Answer Records

Associated Answer Records

AR# 34393
Date 12/15/2012
Status Active
Type General Article
  • Virtex-6 CXT
  • Virtex-6 HXT
  • Virtex-6 LX
  • More
  • Virtex-6 LXT
  • Virtex-6 SXT
  • Less
  • MIG
Page Bookmarked