UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 34961

Project Navigator - Where are the Project Navigator preferences saved on a Linux system?

Description


When Project Navigator is used on a Linux system, you can save the preferences (Edit -> Preferences)if you are not the administrator. If you find that the preferences are not being saved, thenyou should check to see if you have access to the file where it is saved.
Where are the Project Navigator preferences saved on a Linux system?

Solution


For Project Navigator 11.1 and later, the preferences are found in the "ISE.conf" file whichis found in the followinglocation:
< home drive >\.config\Xilinx
If you are unable to save the preferences in Project Navigator, check to see if you have permission to modify this file.
AR# 34961
Date Created 04/15/2010
Last Updated 12/15/2012
Status Active
Type General Article
Tools
  • ISE Design Suite - 11.4
  • ISE Design Suite - 11.1
  • ISE Design Suite - 11.2
  • More
  • ISE Design Suite - 11.3
  • ISE Design Suite - 11.5
  • ISE Design Suite - 12.1
  • Less