UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!
  1. Xilinx - Adaptable. Intelligent.
  2. Support
  3. AR# 3509: M1.4 Win95 - A patch is available to address slow runtimes for applications that load/write .ngd files.

AR# 3509

M1.4 Win95 - A patch is available to address slow runtimes for applications that load/write .ngd files.

Description

The following applications have been recompiled with the
new 4.2 compiler to improve run times on Win95:

map
ngd2edif
ngd2vhdl
ngdbuild
ngd2xnf
ngd2ver
ngdanno

Solution

A patch is available on the Xilinx Download Area:

http://www.xilinx.com/txpatches/pub/swhelp/M1.4_alliance/win95_m14.zip
Password:WIN95ONLY

This patch should be used in addition to the Core Tools Patch:
Reference: http://www.xilinx.com/techdocs/3248.htm

To Install:

Use WinZip or an equivalent utility to install into the
directory that the XILINX variable points to, usually C:\XILINX.

This zip file was created by WinZip. To obtain this utility,
access WinZip's web site at http://www.winzip.com

There is no need to re-start the computer after installation.

WARNING: This patch should not be installed on a WinNT machine.
The M1.4 core tools will not run on a WinNT machine if this patch
is installed. In case of accidental WinNT installation the file

C:\xilinx\bin\nt\orgbasut.dll

should be copied to:

C:\XILINX\bin\nt\libbasut.dll

This Win95 patch will need to be re-installed if the
Core Tools Patch core_nt*.zip is installed.
AR# 3509
Date 04/03/2000
Status Archive
Type General Article

By using this website, I accept the use of cookies.   Learn more

Page Bookmarked