UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 3527

M1.4 Map - FATAL_ERROR:basnc:basncsignal.c:262:1.62 - Could not find a bel for a signal...

Description

FATAL_ERROR:basnc:basncsignal.c:262:1.62 - Could not find a
bel for a signal on pin Y of comp b3_u1_b3_source_select<1>. Its current programmed state is :
CLKX:CLK ECX:EC CLKY:CLK DY:G XMUX:F F4MUX:F4I XQMUX:QX
YQMUX:QY ECY:EC DX:H H1:C1 DIN:C1 SR:C3 EC:C4 H:#LUT:H=H1 RAMCLK:CLK G:#LUT:G=G1 F:#RAM: SRX:RESET FFX:#FF SRY:RESET FFY:#FF

This error is an indication of a mapping error where a
component has been created by the mapper that has an
inconsistancy between the component's configuration and
the external connectivity. In this case the Y pin of a
CLB is involved.

Solution

A fix for this error is included in the current M1.4 Core
Applications patch available from the Xilinx Download Area:

Solaris: http://www.xilinx.com/txpatches/pub/swhelp/M1.4_alliance/core_sol17_m14.tar.Z
SunOS http://www.xilinx.com/txpatches/pub/swhelp/M1.4_alliance/core_sun17_m14.tar.Z
HPUX: http://www.xilinx.com/txpatches/pub/swhelp/M1.4_alliance/core_hp17_m14.tar.Z
Win95/NT: http://www.xilinx.com/txpatches/pub/swhelp/M1.4_alliance/core_nt17.zip

AR# 3527
Date Created 02/26/1998
Last Updated 04/19/2000
Status Archive
Type General Article