UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!
  1. Xilinx - Adaptable. Intelligent.
  2. Support
  3. AR# 3533: A1.4/F1.4 CPLD - List of all CPLD patches available in A1.4/F1.4.

AR# 3533

A1.4/F1.4 CPLD - List of all CPLD patches available in A1.4/F1.4.

Description

keywords: cpld, 1.4, patches

Urgency: Standard

General Description:

An A1.4/F1.4 update file with fixes for the following problems
is avaialable on the Xilinx Download area:

Fixes added by CPLD Patch #10:

The XC9500 timing table has been updated due to improved speed of
the XC9500.
http://www.xilinx.com/techdocs/4469.htm

Fixes added by CPLD Patch #9:

More changes for issue mentioned in solution 4048.
http://www.xilinx.com/techdocs/4048.htm

Fixes problem where combinatorial logic was duplicated with
multilevel logic optimization.
http://www.xilinx.com/techdocs/3730.htm

Fixes added by CPLD Patch #8:

Fix for problem where hitop generates incorrect logic.
http://www.xilinx.com/techdocs/4048.htm

Fixes a case where hitop crashes.
http://www.xilinx.com/techdocs/4067.htm

Fixes added by CPLD Patch #7:

Fix for problem where tsim annotates both an active
and tri-state drive.
http://www.xilinx.com/techdocs/3937.htm

Fixes added by CPLD Patch #6:

A software update is available to support the new CSP48
package in the XC9000 family.
http://www.xilinx.com/techdocs/3801.htm

Fix for problem where "Use Local Macrocell Feedback"
switch produces bad simulation model.
http://www.xilinx.com/techdocs/3802.htm

Fix for problem where M1.4 CPLD - Fitter report & timing
simulation (F1.4) gives incorrect equations.
http://www.xilinx.com/techdocs/3803.htm

Fixes added by CPLD Patch #5:

Fix for Hitop error related to long signal and instance names.
http://www.xilinx.com/techdocs/3732.htm

Fix for Hitop issue where optimization disregards that control
signals can have only 1 pterm.
http://www.xilinx.com/techdocs/3733.htm

Fixes added by CPLD Patch #4:

Support for XC95144
http://www.xilinx.com/techdocs/3442.htm

Fix for problem where pad properties are dropped.
http://www.xilinx.com/techdocs/3275.htm

Solution

The patch is on the Xilinx Download area at:
http://support.xilinx.com/support/techsup/sw_updates/
AR# 3533
Date 03/29/2000
Status Archive
Type General Article
Page Bookmarked