We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 35739

Virtex 4 - Suggestion for handling D_in while in SMAP mode


What is the recommendation regarding the D_in pin while in SMAP mode. Tie high. low or leave Floating?


It is recommended that youtie the D-in pinto GND while in SMAP mode, but you can leave it floating as well since internal pullup/pulldown will be enabled via the Bitgen setting.
AR# 35739
Date 12/15/2012
Status Active
Type General Article
Page Bookmarked