UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!
Page Bookmarked
  1. Xilinx - All Programmable
  2. Support
  3. AR# 35764: 12.1 EDK - "ERROR:EDK - microblaze_0 (microblaze) - can't read "limits": no such variable"

AR# 35764

12.1 EDK - "ERROR:EDK - microblaze_0 (microblaze) - can't read "limits": no such variable"

Description

I uses MicroBlaze v7.30a on an Automotive Spartan-6 device. When trying to configure MicroBlaze, the following Error Message is displayed in the bottom of the MicroBlaze configuration GUI:

"ERROR:EDK - microblaze_0 (microblaze) - can't read "limits": no such variable"

Solution

Only those device falimies that are set to "PRODUCTION" with the option ARCH_SUPPORT_MAP in the MPD file can be configured with the MicroBlaze "Configure IP" GUI.

Those devices that are set to "PRE_PRODUCTION" are not supported.
AR# 35764
Date 05/19/2012
Status Archive
Type Error Message
Tools
  • EDK - 12.1