We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 3605

4.2i Foundation, ABEL - The following error is reported: "AHDL2BLF exited with error code 1"


Keywords: AHDL2BLF, error, ABEL, XABEL

Urgency: Standard

General Description:
The following ABEL error is reported:

"AHDL2BLF exited with error code 1"



If module/file names that contain more than 8 characters are used in ABEL, this error will be reported. To avoid this error, limit the length of the module/file name to 8 or fewer characters.


An improper identifier length can also cause this error. Please note that a pin or node length cannot exceed 31 characters.
AR# 3605
Date 08/16/2002
Status Archive
Type General Article
Page Bookmarked