UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 36943

12.1 Project Navigator - Simulation process is not rerun when an XMP module is added to ISE project

Description

Project Navigator does not detect whether changes on the XMP file have occurred.

For example: A user runs simulation and then makes a change to (or add or deletes) an XMP module from the design.  Even though the previous simulation run has been correctly closed out, running a new simulation process does not take the XMP changes into account.  Project Navigator simply runs simulation with the previous generated simulation files.

Solution

To get the change in EDK source to be used, run Project -> Cleanup Project Files... and then rerun simulation.
  
The issue has been resolved in ISE Design Suite 12.2.
AR# 36943
Date Created 07/22/2010
Last Updated 05/23/2014
Status Archive
Type General Article
Tools
  • ISE Design Suite - 12.1