UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!
  1. Xilinx - All Programmable
  2. Support
  3. AR# 3733: M1.4 CPLD Hitop - Optimization disregards that control signals can have only 1 pterm.

AR# 3733

M1.4 CPLD Hitop - Optimization disregards that control signals can have only 1 pterm.

Description

Keywords: 1.4, cpld, hitop

Urgency: Standard

General Description:

The M1.4 software collapses logic into control signals
disregarding that a control signal can have only 1 product
term. Additional internal nodes are created to implement
the collapsed logic. Each internal node occupies a macrocell
and for this design we run out of resources and can't fit the
design to the targeted device.

Solution

This problem is fixed in the latest M1.4 CPLD Patch available
on the Xilinx support website:

http://support.xilinx.com/support/techsup/sw_updates/
AR# 3733
Date 03/29/2000
Status Archive
Type General Article
Page Bookmarked