We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 37354

12.2/12.3 ChipScope - IBERT - GTH - In the Analyzer the reset does not always set the error bit count to zero


In the ChipScope Analyzer, when the BERT reset button is pressed the error bit count will always be reset to zero. However, when either clicking the Quad reset or Tool bar "Reset All" button, in some situations the error bit count would display a small number of errors. Why is this?


This is an issue with the reset sequence used for the Quad or Reset All buttons. To work around this, use the BERT reset. This issue will be resolved in ChipScope Pro analyzer 12.4.

Linked Answer Records

Master Answer Records

Answer Number Answer Title Version Found Version Resolved
35269 12.x ChipScope Pro - Known Issues for the ChipScope Pro 12.x software N/A N/A
AR# 37354
Date 12/15/2012
Status Archive
Type General Article
  • ChipScope Pro - 12.2
  • ChipScope Pro - 12.3
  • ChipScope Pro IBERT for Virtex-6 GTH
Page Bookmarked