UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 37379

Xilinx PlanAhead Design Assistant- Errors and Warnings

Description

This portion of the Design Assistant will assist you with resolving errors and warnings that you receive within PlanAhead. Please select the portion of the flow below to get more information on it.

Note: This Answer Record is a part of the Xilinx PlanAhead Solution Center (Xilinx Answer 37100). The Xilinx PlanAhead Solution Center is available to address all questions related to PlanAhead. Whether you are starting a new design with PlanAhead or troubleshooting a problem, use the PlanAhead Solution Center to guide you to the right information.

Solution

Explanation of Errors/Warnings during Project Creation:

(Xilinx Answer 37387) for Errors/Warnings while importing netlists to create a new PlanAhead project

(Xilinx Answer 37388) for Errors/Warnings while importing Constraints to create a new PlanAhead project


Explanation of Errors/Warnings while Running DRC's:

(Xilinx Answer 37433)for Errors/Warnings when running DRC's during Pin Planning

(Xilinx Answer 37434) for Errors/Warnings when running DRC's during Floorplanning


Explanation ofErrors/Warnings whileImporting Results:

(Xilinx Answer 37464) for Errors/Warnings when Importing Placement Results.

(Xilinx Answer 37465)for Errors/Warnings when Importing Timing Results.
AR# 37379
Date Created 08/20/2010
Last Updated 12/15/2012
Status Active
Type General Article