UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 37572

Project Navigator - I cannot select Behavioral simulation

Description

When I switch the view to Simulation in the ISE tool, I do not see the option for Behavioral. I do see Post-Translate, Post-MAP, and Post-PAR, but Behavioral seems to be missing. Why?

Solution

This can occur if the Top-Level Source Type is set to EDIF or NGC/NGO.

To change this option to HDL or Schematic, right-click on the device in theISE tooland select Design Properties.Change the option to HDL or Schematic. You should now be able to select Behavioral simulation.

AR# 37572
Date Created 03/01/2011
Last Updated 12/15/2012
Status Active
Type General Article