AR# 3782

Foundation F1.4: Moving pin on a logiblox symbol in Symbol Editor does not update symbol.

Description

Keywords: pin, logiblox, foundation, schematics, editor.

Urgency : Standard

General description:
If you move a pin in Symbol Editor, on a Logiblox
symbol, the change is not reflected in the schematic.
Only the pin name will move, but not the pin.

Solution

The workaround is to delete the entire pin. Then, create a new
pin with the same name and place it at the new location.
AR# 3782
Date 04/04/2000
Status Archive
Type General Article