AR# 38834: Platform Flash XL - SelectMAP - Will configuration complete if there are no pull-down resistors on the address lines for the Platform XL in Slave SelectMAP mode?
AR# 38834
Platform Flash XL - SelectMAP - Will configuration complete if there are no pull-down resistors on the address lines for the Platform XL in Slave SelectMAP mode?
Description
Will configuration complete if there are no pull-down resistors on the address lines for the Platform XL in Slave SMAP mode?
Solution
Configuration will not be successful if these pull-down resistors are not present on the Flash's address lines.
The absence of these pull-downs causes issues during indirect programming of the XL and as a result the FPGA does not get configured.
Was this Answer Record helpful?
AR# 38834
Date
01/27/2015
Status
Active
Type
General Article
Devices
Platform Flash
By using this website, I accept the use of cookies.
Learn more