AR# 38869


SPI-4.2 v10.2 and earlier - Sink core static configuration signal, FifoAFMode, is not set correctly by the GUI


When using the GUI, the generated example design and wrapper always ties FifoAFMode to 0 regardless of what option is set in the GUI. This is incorrect.


To work around this problem, customers must tie off this static configuration signal to the appropriate value based on the desired behavior. See the definition of this static configuration signal in UG153. 
This will be fixed in the SPI-4.2 v10.3 core available in ISE 12.4 software.
AR# 38869
Date 05/23/2014
Status Archive
Type General Article
People Also Viewed