UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 39235

ML605 - FMC connector position on the board

Description

Does the position of the FMC connectors on the ML605 Development Board match the FMC Vita 57.1 spec?

Solution

The ML605 was defined before the Vita 57.1 FMC standard was finalized and mature. The FMC connector on the ML605 carrier board does not fully meet the specification as now stated in the FMC standard. The HPC should be on the left, while the LPC should be on the right. This is something that will not change on the ML605, but future boards (7 series etc) will take this into account and meet the specification.
AR# 39235
Date Created 02/18/2011
Last Updated 12/15/2012
Status Active
Type General Article
Boards & Kits
  • Virtex-6 FPGA ML605 Evaluation Kit