UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 39501

12.x ChipScope Pro - Can I change the radix of multiple buses/signals in Analyzer at the same time?

Description

In the ChipScope Pro Analyzer tool, can I select a group of buses/signals and change their radix at the same time?

Solution

Currently we do not support this feature in ChipScope Pro Analyzer tool. You have to change the radix a bus or signal individually.

This feature is not going to be added before 14.1.
AR# 39501
Date Created 12/21/2010
Last Updated 01/02/2013
Status Active
Type General Article
Tools
  • ChipScope Pro - 11.3
  • ChipScope Pro - 11.4
  • ChipScope Pro - 11.5
  • More
  • ChipScope Pro - 10.1
  • ChipScope Pro - 10.1 sp1
  • ChipScope Pro - 10.1 sp2
  • ChipScope Pro - 10.1 sp3
  • ChipScope Pro - 11.1
  • ChipScope Pro - 11.2
  • ChipScope Pro - 12.1
  • ChipScope Pro - 12.2
  • ChipScope Pro - 12.3
  • ChipScope Pro - 12.4
  • ChipScope Pro - 13.1
  • Less