We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 39574

Serial RapidIO v5.5 - Can I use Xilinx Vendor ID 0x000E in the Assembly Vendor Identity register?


Can I use Xilinx Vendor ID 0x000E in theAssembly Vendor Identity register?


If you are using SRIO in a closed system, you can use Xilinx device ID-Vendor ID but with no guarantees on software malfunctions causedby vendor ID conflicts. However, for any open system applications, such as an ATCA/AMC chassis, you will have to obtain the vendor ID from the RapidIO Trade Association.

Revision History:
09/12/2010 - Initial Release
AR# 39574
Date 12/15/2012
Status Active
Type General Article
  • Serial RapidIO
Page Bookmarked