UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 39884

12.x SmartXplorer - How can I change the locked Implementation options after copying results

Description

After copying SmartXplorer results, some Implementation options which are specified in the SmartXplorer strategy are grayed out in the "Process Properties". How can I change these options if I want to try a different option with this strategy?For example,if I want to generate a timing report with a larger number of error paths, how can I change the -e option of the Post-Place & Route Static Timing Report Properties?

Solution

After a Design Strategy (including SmartXplorer Strategy) is used, the process options specified in the Strategy will be locked (grayed out). To unlock these options, run "Project -> Design Goals & Strategies..." and then check "Unlock"in the right bottom corner.
AR# 39884
Date Created 01/21/2011
Last Updated 12/15/2012
Status Active
Type General Article
Tools
  • ISE Design Suite - 12.1
  • ISE Design Suite - 12.2
  • ISE Design Suite - 12.3
  • More
  • ISE Design Suite - 12.4
  • ISE Design Suite - 13
  • ISE Design Suite - 13.1
  • Less