UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!
  1. Xilinx - Adaptable. Intelligent.
  2. Support
  3. AR# 40038: 12.3 XST - Hierarchy separator changed for record type in 12.3 from 12.2

AR# 40038

12.3 XST - Hierarchy separator changed for record type in 12.3 from 12.2

Description

Designs which have a simple record type defined could see failures with their constraints in both XCF and UCF files, where in 12.2 the hierarchy separator was a ".", but now in 12.3 it is "_".

Constraints files are likely to cause failures when porting designs from 12.2 to 12.3, or 12.4.

Solution

This change was done intentionally to fix an issue in NGDBuild. Users who experience this issue should modify their constraints to use the "_" instead of the "." for their hierarchy separator.
AR# 40038
Date 12/15/2012
Status Archive
Type General Article
Tools
  • ISE Design Suite - 12.3
  • ISE Design Suite - 12.4
Page Bookmarked