AR# 40076

12.1 EDK - Can an EDK BRAM block be configured with different port width on 2 ports?

Can an EDK BRAM block be configured with different port widths on 2 ports?

No, only 32-bit port width is supported.

To do this, you would need to use Core Generator to create the BRAM block and then make it a custom IP to work with the EDK system.

You might also need to edit the BMM file if the software application needs to be stored in this BRAM block inside the custom IP.

Was this Answer Record helpful?

AR# 40076
Date	09/12/2014
Status	Active
Type	General Article
Tools	EDK - 11.1 EDK - 11.2 EDK - 11.3 More EDK - 11.4 EDK - 11.5 EDK - 12.1 EDK - 12.2 EDK - 12.3 EDK - 12.4 EDK - 13 EDK - 13.1 Less
IP	Block Memory Generator

Page Bookmarked