UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!
  1. Xilinx - All Programmable
  2. Support
  3. AR# 40316: XtremeDSP Development Platform Spartan-3A DSP 3400A - Reserved configuration mode

AR# 40316

XtremeDSP Development Platform Spartan-3A DSP 3400A - Reserved configuration mode

Description

XtremeDSP Development Platform Spartan-3A DSP 3400A Edition User Guide, UG498 v2.2, lists M[2:0] = 100 as a valid configuration mode. Is this the case?

Solution

Table 1-25 of UG498 lists the valid configuration modes for the Spartan-3A DSP device on the XtremeDSP Development Platform: Spartan-3A DSP 3400A Edition. This table includes:

Master SelectMAP M[2:0] = 100

However, M[2:0] = 100 is a reserved mode for the entire Spartan-3 and extended families (including Spartan-3A DSP devices). Master SelectMAP mode is not supported on this board.
AR# 40316
Date 12/15/2012
Status Active
Type General Article
Devices
  • Spartan-3A DSP
Page Bookmarked