UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 40550

MIG DDR3 - Can I use a low voltage DDR3 part on Virtex-6 FPGA?

Description

I would like to use 1.35v DDR3 in Virtex-6 FPGA. Is this possible?

Solution

No, Virtex-6 FPGA does not have SSTL135, DIFF_SSTL135, SSTL135_DCI or DIFF_SSTL135_DCI I/O standards to support DDR3L (1.35V) devices.

AR# 40550
Date Created 02/10/2011
Last Updated 08/08/2013
Status Active
Type General Article
Devices
  • Virtex-6 CXT
  • Virtex-6 HXT
  • Virtex-6 LX
  • More
  • Virtex-6 LXT
  • Virtex-6 SXT
  • Virtex-6Q
  • Less
IP
  • MIG