2. Support
  3. AR# 40578: MIG 7 Series v1.1 - Fixed latency mode is not supported for QDRII+ designs

AR# 40578

|

MIG 7 Series v1.1 - Fixed latency mode is not supported for QDRII+ designs

Description

I can enable the Fixed Latency Mode in MIG 7 Series v1.1.

Is Fixed Latency Mode supported?

Solution

No, Fixed Latency Mode is not supported in MIG 7 Series v1.1, but is supported starting with the 13.2 release.

When using Fixed Latency Mode, if calibration results are less than the selected fixed delay value, then MIG will add delay to match the fixed value.

Linked Answer Records

Master Answer Records

Answer Number Answer Title Version Found Version Resolved
40050 MIG 7 Series v1.1 - Release Notes and Known Issues for ISE Design Suite 13.1 N/A N/A

Associated Answer Records

Answer Number Answer Title Version Found Version Resolved
40050 MIG 7 Series v1.1 - Release Notes and Known Issues for ISE Design Suite 13.1 N/A N/A
AR# 40578
Date 08/26/2014
Status Active
Type Known Issues
Devices
IP
People Also Viewed