AR# 40684


MIG Spartan-6 MCB - Multi-Controllers


This section of the MIG Design Assistant focuses on using multi-controller implementations with Spartan-6 MCB designs. Below you will find information related to your specific question.

Note: This Answer Record is part of the Xilinx MIG Solution Center (Xilinx Answer 34243). The Xilinx MIG Solution Center is available to address all questions related to MIG. Whether you are starting a new design with MIG or troubleshooting a problem, use the MIG Solution Center to guide you to the right information.


MIG supportsmulti-controllers through the MIG tool. Up to fourcontrollers of either DDR3, DDR2, DDR, LPDDR, or a combination of these can be designed within the tool. The tool recognizesthe number of controllers that are available based on the selected FPGA device.

(Xilinx Answer 34934)-Is it possible to share PLL and BUFPLL_MCB resources in multi-controller designs?

Linked Answer Records

Associated Answer Records

Answer Number Answer Title Version Found Version Resolved
40155 MIG Design Assistant - Spartan-6 MCB Supported Features N/A N/A
AR# 40684
Date 12/15/2012
Status Active
Type General Article
People Also Viewed