UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!
  1. Xilinx - Adaptable. Intelligent.
  2. Support
  3. AR# 40751: DSP48/A/A1/E/E1 Slice - Why am I seeing erratic behavior on the output?

AR# 40751

DSP48/A/A1/E/E1 Slice - Why am I seeing erratic behavior on the output?

Description

Why am I seeing erratic behavior on the output?

Solution

This can happen if the DSP Slice is not properly constrained.

It is recommend that users seeing such behavior should thoroughly examine their constraints of the data paths feeding the DSP48/A/A1/E/E1 Slice.

It is also recommended that the user review the constraints on the output path of theDSP48/A/A1/E/E1 Slice, though it is more likely to be the input causing corrupted data to be latched into the registers.
AR# 40751
Date 12/15/2012
Status Active
Type General Article
Devices
  • Artix-7
  • Kintex-7
  • Spartan-3A DSP
  • More
  • Spartan-6 LX
  • Spartan-6 LXT
  • Virtex-4 FX
  • Virtex-4 LX
  • Virtex-4 QPro/R
  • Virtex-4 SX
  • Virtex-4Q
  • Virtex-4QV
  • Virtex-5 FXT
  • Virtex-5 LX
  • Virtex-5 LXT
  • Virtex-5 SXT
  • Virtex-5 TXT
  • Virtex-5Q
  • Virtex-5QV
  • Virtex-6 CXT
  • Virtex-6 HXT
  • Virtex-6 LX
  • Virtex-6 LXT
  • Virtex-6 SXT
  • Virtex-6Q
  • Virtex-7
  • Virtex-7 HT
  • Less
Page Bookmarked