We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 41856

Spartan-6 - BitGen - What does the following warning mean, WARNING:PhysDesignRules:1969 ?


When running BitGen the following warning can be seen:

WARNING:PhysDesignRules:1969 - IOB (Sig_N) (Slave) is driving BUFIO2_2CLK
xxxx/xxxx/bufio2_2clk_i (Master) while I_INVERT is FALSE. I_INVERT is
NOT set but the IOB to BUFIO2_2CLK signal WILL be inverted.


The reason for this is that the I_INVERT of the BUFIO2 should be set to TRUE when using the BUFIO2_2Clk and BUFIO2 together for a DDR application.

If the I_INVERT is set to TRUE, a MAP error is seen. The workaround is to allow BitGen make the inversion.

This issue is resolved in ISE Design Suite 13.2.
AR# 41856
Date 12/15/2012
Status Active
Type General Article
  • Spartan-6 LX
  • Spartan-6 LXT
  • Spartan-6Q
  • ISE Design Suite - 13.1
Page Bookmarked