UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 41988

13.4 - "ERROR:Place:1318 - User has over-constrained component ..."

Description

The following error occurs:

"ERROR:Place:1318 - User has over-constrained componentinst_clkin/rx_bufpll_inst. There are no placeable sites that satisfy the user constraints. Please review the user constraints on the driver component andthe load components of inst_clkin/rx_bufpll_inst."

I am not sure where the restriction lies. How do I resolve this issue?

Solution

BUFPLL needs to have all of its IOB loads placed into the same I/O bank. This error occurs if the user-specified LOC constraints violate this rule.

To resolve the error, make sure all the IOB loads of the BUFPLL instance are locked to the same bank.

AR# 41988
Date Created 03/21/2012
Last Updated 05/19/2012
Status Active
Type Error Message
Devices
  • Spartan-6 LX
  • Spartan-6 LXT
  • Spartan-6Q
Tools
  • ISE Design Suite - 12.1
  • ISE Design Suite - 12.2
  • ISE Design Suite - 12.3
  • More
  • ISE Design Suite - 12.4
  • ISE Design Suite - 13
  • ISE Design Suite - 13.1
  • ISE Design Suite - 13.2
  • ISE Design Suite - 13.3
  • Less