UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 4205

14.x Timing Closure - TRCE reports only three paths per timing constraint by default. How do I increase the number of paths per constraint?

Description

How do I increase the number of paths per timing constraint in the Timing Analyzer report, when the default is only three paths per timing constraint?

Solution

All reports that can be generated in Timing Analyzer include an "Options" tab. Under this tab, you can specify the "limit report to" number to the number of paths per constraint that you want to view.

You can also specify this number on the command line of "trce -v 15."
AR# 4205
Date Created 08/21/2007
Last Updated 12/15/2012
Status Active
Type General Article
Tools
  • ISE - 10.1
  • ISE Design Suite - 11.1
  • ISE Design Suite - 11.2
  • More
  • ISE Design Suite - 11.3
  • ISE Design Suite - 11.4
  • ISE Design Suite - 11.5
  • ISE Design Suite - 12.1
  • ISE Design Suite - 12.2
  • ISE Design Suite - 12.3
  • ISE Design Suite - 12.4
  • ISE Design Suite - 13
  • ISE Design Suite - 13.1
  • ISE Design Suite - 13.2
  • ISE Design Suite - 13.3
  • ISE Design Suite - 13.4
  • ISE Design Suite - 14.1
  • Less