UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 43483

ISE Design Suite 13 DSP Tools (System Generator for DSP) (13.2) - README

Description

This Answer Record contains the Release Notes and Known Issues for System Generator for DSP 13.2.

Solution

Installationinstructions and a list of the Release Notes and Known Issues in System Generator for DSP 13.2 are included in this Answer Record. A successful installation of ISE Design Suite 13.2 changes your design tools version number to 13.1 (verify by running xlVersion at the MATLAB prompt).

Release Notes and New Features in System Generator for DSP 13.2

For a list and description of the new features and Release Notesin 13.2, see the ISE Design Suite 13: Release Notes Guide (UG631):
http://www.xilinx.com/support/documentation/sw_manuals/xilinx13_2/irn.pdf

Please be sure toread the documentation because it answers questions that you might have about changes to the functionality or the look from previous versions of System Generator for DSP. The System Generator User Guide is accessible in PDF format at:
http://www.xilinx.com/support/documentation/sw_manuals/xilinx13_2/sysgen_user.pdf

For System Generator for DSP Release Notes for other versions, see (Xilinx Answer 29595).

Frequently Asked Questions
Installation and setup
(Xilinx Answer 17966) - What software is required to install System Generator for DSP?
(Xilinx Answer 32257) - How can I tell if the DSP Tools are installed and configured for use in MATLAB?
(Xilinx Answer 24842) - How can I switch between multiple versions of System Generator for one MATLAB installation?
(Xilinx Answer 32258) - How can I install just the DSP Tools without reinstalling all of the ISE Design Tools?
(Xilinx Answer 25306) - Which version of System Generator supports the latest version of MATLAB?
(Xilinx Answer 31095) - Why do I receive "Error while executing C MEX S-function 'sysgen', (mdlTerminate). Unexpected unknown exception from MEX file" when I simulate my System Generator model? How do I set up my system environment properly?
(Xilinx Answer 33788) - How does System Generator license checkout work?

MATLAB and Simulink Interaction
(Xilinx Answer 31933) - Why do I receive an error message stating "continuous sample times are not allowed" when driving a Simulink Spectrum Scope with Xilinx System Generator blocks?
(Xilinx Answer 30131) - Why is the sample rate passed to Simulink blocks from my gateway out different than the sample rate passed to my System Generator blocks?
(Xilinx Answer 21750) - Why do I receive a "xlSimulationRequired" or "Reference to a cleared variable sysgen_return_status" error when I try to generate the design?
(Xilinx Answer 23000) - An indeterminate input data (also known as a NAN) error occurs when design is simulated.
(Xilinx Answer 24616) - Why am I unable to access the quantization parameters in the FDATool in System Generator?
(Xilinx Answer 25255) - Why do I receive a Simulink message stating, "Use of this data type requires a fixed-point license, but license checkout failed"?
(Xilinx Answer 23328) - What is the recommended Simulink simulation solver? Why do I see incorrect behavior when a fixed-step solver is used?
(Xilinx Answer 32810) - Why does my data not appear downsampled when I use "first value of frame" with a latency of 0 with the downsample block?
(Xilinx Answer 32856) - Why do I receive an internal error or see MATLAB crash if I use the Simulink Simulation option "Accelerator"?

Third-party Synthesis Tools
(Xilinx Answer 24273) - I cannot generate an NGC, Bitstream, Timing Analysis, or Hardware in the Loop target when using Synplify as my synthesis tool. Why?
(Xilinx Answer 31112) - Why do I receive the message "Failed to execute command "project set {Synthesis Tool} {Synplify Pro (VHDL/Verilog)}"" when trying to use Synplify Pro for my synthesis tool from System Generator?
(Xilinx Answer 29170) - Why are there simulation mismatches at the beginning of the HDL simulation generated from System Generator for DSP when Synplify is used for synthesis?

General
(Xilinx Answer 24257) - Why do I see an instantiated register called "xlpersistentdff" in a System Generator for DSP design?
(Xilinx Answer 19599) - JTAG Hardware Co-Sim with non-Xilinx parts in the chain causes error.
(Xilinx Answer 29430) - Why do I receive a standard exception error message when I generate my model?
(Xilinx Answer 35474) - How can I simulate my Multiple clock domain System Generator design in VHDL?

Known Issues
(Xilinx Answer 43500) - System Generator for DSP v13.1/13.2 - There is a discrepancy between UG631 and AR 17966. Can 13.1 support R2011a?
(Xilinx Answer 43516) - System Generator for DSP v13.2 - Why do the DSP48 blocks seem to be working incorrectly andthereis anissue with the OPCODE blocks?
(Xilinx Answer 43515) - System Generator for DSP v13.x - Can I configure the ML605 board via the ethernet interface?
(Xilinx Answer 43501)- Why when using MATLAB R2010a, or R2010b, and starting from MATLAB token, are some variables not set and my SysGen simulation crashes?
(Xilinx Answer 43570)-System Generator for DSP - If I use the user-defined output from a basic block e.g AddSub, Mult, CMult, my performance seems to be reduced Why?
(Xilinx Answer 43728)System Generator - When i use xlswitchLibrary command I get a Error using ==> xlSwitchLibrary message. Why?
(Xilinx Answer 44146) 13.2 System Generator for DSP - I do not get any output from Viterbi v7.0 in Simulink Simulation? Why?

Linked Answer Records

Master Answer Records

Answer Number Answer Title Version Found Version Resolved
29595 Xilinx DSP Tools, System Generator for DSP, and AccelDSP Synthesis Tool - Release Notes and Known Issues N/A N/A

Associated Answer Records

AR# 43483
Date Created 08/10/2011
Last Updated 05/20/2012
Status Active
Type Release Notes
Tools
  • System Generator for DSP - 13.2