UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 43489

Virtex-7, Kintex-7 - How to correctly setup IBIS-AMI simulation

Description

An incorrectsetup in the IBIS-AMI simulator displays incorrectresults.

Solution

The default simulation settings do not work properly. In particular, 64 samples per UI are needed in this model.
When 64 samples per UI are used, the following (correct) eye diagram is achieved.

AR# 43489
Date Created 08/05/2011
Last Updated 12/15/2012
Status Active
Type General Article
Devices
  • Virtex-7
  • Kintex-7