UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!
Page Bookmarked
  1. Xilinx - All Programmable
  2. Support
  3. AR# 44018: MIG 7 Series v1.3 DDR3/QDRII+/RLDRAM II - Synplify Pro not supported in 13.3

AR# 44018

MIG 7 Series v1.3 DDR3/QDRII+/RLDRAM II - Synplify Pro not supported in 13.3

Description

Synplify Pro support has been removed from MIG 7 Series v1.3 due to updated parameter changes in the PHASER hard blocks which are required during implementation.

Solution

These updated parameters are not available in the Synplify Pro libraries and will cause synthesis errors when using Synplify Pro.

Synplify Pro still works for with ISE 13.2 software and MIG 7 Series v1.2. Xilinx expects to have Synplify Pro support beginning again in 13.4.

Linked Answer Records

Master Answer Records

Answer Number Answer Title Version Found Version Resolved
43099 MIG 7 Series v1.3 - Release Notes and Known Issues for ISE Design Suite 13.3 N/A N/A

Associated Answer Records

Answer Number Answer Title Version Found Version Resolved
43099 MIG 7 Series v1.3 - Release Notes and Known Issues for ISE Design Suite 13.3 N/A N/A
AR# 44018
Date 05/22/2012
Status Active
Type Known Issues
Devices
  • Kintex-7
  • Virtex-7
  • Virtex-7 HT
IP
  • MIG 7 Series