We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 44220

13.2 EDK - My ELF file No Longer Works after a Second Program in SDK


When I download my ELF file using the SDK (Xilinx Tools -> Program FPGA), it works the first time. When I program it a second time, I see that the ELF file is already selected, and I press the program again, but it does not work (no errors) the second time. What is going on?


The SDK is incorrectly downloading the bootloopELF file, even though the dialog will, by default, show your application ELFas selected. While the dialog box shows your application selected, you must re-select it in the list for it to program properly.

This is a known issue that has been addressed. It is scheduled to be fixedinthe 13.3 softwarerelease of the tools.

AR# 44220
Date 12/15/2012
Status Active
Type General Article
  • EDK - 11.1
  • EDK - 11.2
  • EDK - 11.3
  • More
  • EDK - 11.4
  • EDK - 11.5
  • EDK - 12.1
  • EDK - 12.2
  • EDK - 12.3
  • EDK - 12.4
  • EDK - 13
  • EDK - 13.1
  • EDK - 13.2
  • Less
Page Bookmarked