We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome,
Internet Explorer 11,
Safari. Thank you!
AR# 45488: LogiCORE IP Serial RapidIO Gen2 v1.2 - When a forced re-initialization occurs, the core does not restart the IDLE sequence selection
LogiCORE IP Serial RapidIO Gen2 v1.2 - When a forced re-initialization occurs, the core does not restart the IDLE sequence selection
When a forced re-initialization sequence occurs, the coremaintains the last IDLE selected information instead of searching for a new IDLEsequence. This can cause the core to notinitialize properly if the IDLE sequence has changed.
This is a known issue that is to be fixed in the v1.3 release of the core.
1/9/2012 - Initial release
Was this Answer Record helpful?