AR# 4579

F1.5, XABEL - Problem with functional simulation of ABEL designs following CPLD Quick Install.


Keywords: XABELSIM, simulate, XABEL, ABEL, CPLD Quick Install

Urgency: Standard

General Description:
When functional simulation is invoked for any design containing an ABEL module,
the netlist will not load properly if the software was installed using the CPLD Quick
Install option. The simulation library XABELSIM was not attached automatically,
causing "Unknown component" warnings.


To work around this problem, open any project and click on File ->Project Libraries.
Open the Attach Library window by clicking "Attach." Select the drive on which the
software is installed and click "Update." This will locate all libraries on that drive and
list them. Now, select XABELSIM from the listed libraries, click "OK," and close the
windows. The XABELSIM library is now available, and should be automatically used
when you run functional simulation on your ABEL design.
AR# 4579
Date 03/28/2001
Status Archive
Type General Article