AR# 45850: 13.3 CORE Generator - "Customize the IP and Generate the selected output products" omits simulation models
AR# 45850
13.3 CORE Generator - "Customize the IP and Generate the selected output products" omits simulation models
Description
With the FIFO v6.0 IP selected in a CORE Generator project, if I right click and select "Customize the IP and Generate the selected output products" simulation files (.v, .vhd) and documentation for the IP core are not generated.
If you run in batch mode all usual outputs are created. If you click 'Customize & Generate' all usual outputs are created. If you click 'Customize and generate the selected...', then the simulation models are omitted
Solution
If the core is generated in batch mode all usual outputs are created or if you click 'Customize & Generate' all usual outputs are created.
The simulation models and documentation are only omitted when using the "Customize the IP and Generate the selected output products" option.
This issue is resolved in ISE Design Suite 13.4.
Was this Answer Record helpful?
AR# 45850
Date
05/19/2012
Status
Archive
Type
Known Issues
Tools
ISE Design Suite - 13.3
By using this website, I accept the use of cookies.
Learn more