AR# 46107

13.2 EDK - XPS_MCH_EMC Is it possible to configure Flash and SRAM to the same EMC instance?

Description

Is it possible to configure Flash and SRAM using an EMC instance in EDK?

Is there an example of how to do this?

Solution

The EMC controller can be configured to connect to an SRAM and a Flash. 

The procedure to do this is outlined on pages 37 to 41 of this document.

http://www.xilinx.com/products/boards/ml507/ml507_12.1/docs/ml507_bsb_ppc440_std_ip_addition.pdf.

This procedure can also be used with a MicroBlaze processor.

AR# 46107
Date 07/07/2014
Status Active
Type General Article
IP