UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 47648

KC705 User Guide v1.1 (UG810) - SW11 DIP Switch Correction

Description

On page 46, of the KC705 Evaluation Board for the Kintex-7 FPGA User Guide v1.1 (UG810), it indicates that the 4-position user DIP Switch (SW11) is a set of signals GPIO_DIP_SW[4-0].This implies that this is a 5-position user DIP Switch.

Is SW11 a 4-position or 5-position DIP Switch?

Solution

SW11 is the 4-position user DIP Switch on the KC705. This is labeled SW11 on the silkscreen and schematic, and the signals to this switch are GPIO_DIP_SW[3:0]:

GPIO_DIP_SW3
GPIO_DIP_SW2
GPIO_DIP_SW1
GPIO_DIP_SW0

The KC705 schematic is correct and should be followed.

SW11 information has been updated on page 49 of KC705 Evaluation Board for the Kintex-7 FPGA User Guide (UG810) v1.4:


Linked Answer Records

Master Answer Records

Answer Number Answer Title Version Found Version Resolved
45934 Kintex-7 FPGA KC705 Evaluation Kit - Known Issues and Release Notes Master Answer Record N/A N/A

Associated Answer Records

Answer Number Answer Title Version Found Version Resolved
45934 Kintex-7 FPGA KC705 Evaluation Kit - Known Issues and Release Notes Master Answer Record N/A N/A
AR# 47648
Date Created 05/01/2012
Last Updated 01/10/2014
Status Active
Type General Article
Boards & Kits
  • Kintex-7 FPGA KC705 Evaluation Kit