UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!
  1. Xilinx - Adaptable. Intelligent.
  2. Support
  3. AR# 47682: 14.1 ChipScope Analyzer - When editing the XADC registers in the analyzer, register 0x53 is missing a description

AR# 47682

14.1 ChipScope Analyzer - When editing the XADC registers in the analyzer, register 0x53 is missing a description

Description

This answer record discusses a known issue in the 14.1 tool when editing XADC registers in the ChipScope analyzer for Zynq devices.

Solution

If editing the XADC registers in the ChipScope analyzer for Zynq devices, register 0x53 is missing the description. The register name for 0x53 should be "Alarm Reg. #3 OT upper." This is a known issue in 14.1 and will be fixed in the 14.2 tools.

Linked Answer Records

Master Answer Records

Answer Number Answer Title Version Found Version Resolved
47769 14.x ChipScope Pro and 2012.x Vivado Debug - Known Issues for the 14.x ChipScope Pro and 2012.x Vivado Debug tools N/A N/A
AR# 47682
Date 07/17/2012
Status Active
Type Known Issues
Devices
  • Zynq-7000
Tools
  • ChipScope Pro - 14.1
Page Bookmarked