AR# 4818

F1.5/F1.5i, Calc3ka: F1.5 calc3ka sample project has incorrect design flow type

Description

Keyworks: F1.5, project manager, sample project, calc3ka

Urgency: Standard

Genaeral description: The sample project "calc3ka" is incorrectly
specified as a HDL flow project. The project subdirectory does not \
contain any HDL files, only schematic sheets.

When the project pdf file is opened in F1.5, the default flow
is HDL, but no source/macro files are found by the project
manager. When the flow is changed to a schematic flow, all
works as intended.

Solution

Open the sample project. Then manually change the design flow from an HDL
to a schematic flow as follows:
select File -> Project Type, then choose Schematic, and Change.

AR# 4818
Date 03/07/2002
Status Archive
Type General Article