We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 4862

A1.5/F1.5 Map - RLOCs on BUFEs do not work correctly


Keywords: Map, bufe, rloc

Urgency: Standard

Description: When a user applies a RLOC to a BUFE map will ignore the RLOC. There is no warning stating this is happening.


The workaround is to replace the BUFE with a BUFT and place an inverter on the
enable input. Then apply the RLOC to the BUFT.
AR# 4862
Date 04/19/2000
Status Archive
Type General Article
Page Bookmarked