UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 4961

M1.5 LOGIBLOX, FOUNDATION - Foundation Documentation on LogiBLOX implies that one can manipulate the pad_loc value of a LogiBLOX pad through the schematic editor.

Description

Keyword: pad_loc, LogiBLOX, schematic editor

Urgency: Standard

General Description;
The help file in Foundation regarding LogiBLOX pads is somewhat misleading; it implies that you
can create a LogiBLOX pad with pad_loc specifications that can then be altered using the
the schematic editor. This is not true.

Solution

The only way to specify different pad location ranges on a LogiBLOX PAD module in a schematic
currently is to generate a new LogiBLOX PAD module for each set of location ranges required.

Alternatively, you can use a .ucf file to lock your pins to the desired location.

AR# 4961
Date Created 08/31/2007
Last Updated 02/15/2001
Status Archive
Type ??????