AR# 50352

KC705 Evaluation Board for the Kintex-7 FPGA User Guide v1.1 (UG810) - SFP_RS1 Board Connection Incorrect in Table 1-14

Description

In Table 1-14 of the KC705 Evaluation Board for the Kintex-7 FPGA User Guide v1.1 (UG810), it lists Jumper J26 as the jumper associated with signal SFP_RS1. However, the KC705 schematic shows J28 as the jumper associated with this signal.

Which one is the correct jumper?

Solution

The KC705 schematic is correct - J28 is the jumper that is used in conjunction with the signal SFP_RS1.

50352-1.jpg
50352-1.jpg



This information has been updated intheKC705 Evaluation Board for the Kintex-7 FPGA User Guide (UG810) (v1.2).

AR# 50352
Date 02/11/2013
Status Active
Type General Article
Devices
Boards & Kits