AR# 50863

Zynq-7000 SoC - Debug

Description

This answer record keeps track of all the Zynq-7000 SoC answer records related to all the debug solutions available, including debug guides and how to setup third-party debugging tools.

Note: This article is part of Xilinx Zynq-7000 SoC Solution Center (Xilinx Answer 52512).

the Xilinx Zynq-7000 SoC Solution Center is available to address all questions related to Zynq-7000 SoC.

Whether you are starting a new design with Zynq-7000 SoC or troubleshooting a problem, use the Zynq-7000 SoC Solution Center to guide you to the right information.

Solution

General Zynq-7000 Debug Setup Answer Records


(Xilinx Answer 46881) Zynq-7000 Debug - How do I set up a third-party debug environment on the ZC702 board?
(Xilinx Answer 51878) Zynq-7000 Debug - Routing PJTAG to the Mictor connector on FMC-105 attached on ZC702
(Xilinx Answer 46915) Zynq-7000 Debug - Set up the TRACE port via EMIO on the ZC702 board.
(Xilinx Answer 52095) Zynq-7000 Debug - Set up the TRACE port via EMIO and PJTAG via MIO PMOD on the ZED board.
(Xilinx Answer 51787) Zynq-7000 SoC - Questions about debug resets


Setting Up Third-party Debug Tools Answer Records


ARM Answer Records

(Xilinx Answer 47764) Zynq-7000 Debug - ARM DS-5 Getting Connected Guide on ZC702


Lauterbach Answer Records


(Xilinx Answer 47767) Zynq-7000 Debug - Lauterbach Startup Script for ZC702
(Xilinx Answer 51128) Zynq-7000 Debug - How do I debug the Linux kernel using Lauterbach T32?
(Xilinx Answer 47002) Zynq-7000 Debug - How to program a bitstream using Lauterbach
(Xilinx Answer 46988) Zynq-7000 Debug - How do you run ps7_init.tcl from Lauterbach?


Other Answer Records

(Xilinx Answer 51932) Zynq-7000 Debug - Real-time debugging using Green Hills Probe


ChipScope on Zynq-7000 Answer Records


(Xilinx Answer 53960) 14.x EDK, ChipScope - Is Cross triggering enabled on Zynq and how is it done?
(Xilinx Answer 50583) 2012.2/14.2 - ChipScope Pro - 7 Series GTX IBERT, 1.X ILA, ICON, VIO cores support Zynq-7000 devices
(Xilinx Answer 47769) 14.x ChipScope Pro and 2012.x Vivado Debug - Known Issues for the 14.x ChipScope Pro and 2012.x Vivado Debug tools


Zynq-7000 Boards Debug Answer Records


(Xilinx Answer 54013) Zynq-7000 SoC ZC706 Evaluation Kit - Board Debug Checklist
(Xilinx Answer 54012) Zynq-7000 SoC ZC702 Evaluation Kit - Board Debug Checklist
(Xilinx Answer 54134) Zynq-7000 SoC ZC706 Evaluation Kit - Interface Test Designs
(Xilinx Answer 54130) Zynq-7000 SoC ZC702 Evaluation Kit - Interface Test Designs


Related Documentation

Zynq-7000 SOC Technical Reference Manual:

Chapter 23: Programmable Logic (PL) Test and Debug
Chapter 27: JTAG and DAP Subsystem
Chapter 28: System Test and Debug

Useful Links

For the initialization script to run on TRACE32 to connect to the Zynq processors on the ZC702 board (http://www.lauterbach.com/scripts.html).

For more information on ARM DS-5 (www.arm.com/ds5).

For Zynq-7000 Embedded Software Solutions by Green Hills Software (http://www.ghs.com/products/xilinx_zynq.html).

For FMC Debug Module HW-FMC-105-DEBUG schematics (https://www.xilinx.com/support/documentation/boards_and_kits/xtp078.pdf)

Linked Answer Records

Master Answer Records

Answer Number Answer Title Version Found Version Resolved
52512 Xilinx Zynq-7000 SoC Solution Center N/A N/A
52511 Zynq-7000 SoC Design Assistant N/A N/A

Child Answer Records

Answer Number Answer Title Version Found Version Resolved
46881 Zynq-7000 Debug - How do I set up a third-party debug environment on the ZC702 board? N/A N/A
46915 Zynq-7000 Debug - Setup the TRACE port via EMIO on the ZC702 board N/A N/A
47764 Zynq-7000 Debug - ARM DS-5 Getting Connected Guide on ZC702 N/A N/A
46988 Zynq-7000 Debug - How do you run ps7_init.tcl from Lauterbach? N/A N/A
47002 Zynq-7000 Debug - How do you program a bitstream using Lauterbach? N/A N/A
51878 Zynq-7000 Debug - Routing PJTAG to the Mictor connector on FMC-105 attached on ZC702 N/A N/A
51932 Zynq-7000 Debug - Real-time debugging using Green Hills Probe N/A N/A
47767 Zynq-7000 Debug - Lauterbach Startup Script for ZC702 N/A N/A
52095 Zynq-7000 Debug - 2014.1 Setup the TRACE port via EMIO and PJTAG via MIO PMOD on the ZED board N/A N/A
51128 Zynq-7000 Debug - How do I debug the Linux kernel using Lauterbach T32? N/A N/A
51807 14.2 XMD, Zynq-7000 - Why does the XMD flow hang when I run an application that uses the PL AXI ports? N/A N/A
53960 14.x EDK, ChipScope - Is Cross Triggering enabled on Zynq and how is it done? N/A N/A
50583 2012.2/14.2 - ChipScope Pro - 7 Series GTX IBERT, 1.X ILA, ICON, VIO cores support Zynq-7000 devices N/A N/A
47769 14.x ChipScope Pro and 2012.x Vivado Debug - Known Issues for the 14.x ChipScope Pro and 2012.x Vivado Debug tools N/A N/A
54013 Zynq-7000 SoC ZC706 Evaluation Kit - Board Debug Checklist N/A N/A
54012 Zynq-7000 SoC ZC702 Evaluation Kit - Board Debug Checklist N/A N/A
54134 Zynq-7000 SoC ZC706 Evaluation Kit - Interface Test Designs N/A N/A
54130 Zynq-7000 SoC ZC702 Evaluation Kit - Interface Test Designs N/A N/A

Associated Answer Records

Answer Number Answer Title Version Found Version Resolved
50991 Zynq-7000 SoC - What devices are supported for configuration? N/A N/A
AR# 50863
Date 05/22/2018
Status Active
Type Solution Center
Devices
Tools
Boards & Kits