AR# 5102

M1.5: TRCE: Unconstrained path analysis appears in the middle of the timing report for VIRTEX

Description

General Description: Normally the Unconstrained path report is placed at the end of the timing

report. However, constraints applied to the output nets of the DLL are placed in the timing

report after the unconstrained section. This should not cause the user to think that the DLL is

unconstrained. This is simply a formating issue.

Solution

This is fixed in the next release, which is 2.1i.

AR# 5102
Date 01/18/2010
Status Archive
Type General Article