We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 51066

PlanAhead - Importing an ISE project with IP cores results in a re-declaration error


I have imported my ISE project into PlanAhead, but when I run Synthesis, there is a module re-declaration error for one of the IP cores in the design.

For Example:

[HDLCompiler 687] Illegal redeclaration of module <RAM_core>. ["//EDA/project_1/project_1.srcs/sources_1/ip/RAM_core/RAM_core_synth.v":47]


This issue might be due to having both a <core_name>_synth.v and a <core_name>.v in the synthesis folder of the core.

To resolve the issue, follow the steps below:

  1. Right click on the IP core and select Reset
  2. Right Click on the IP core again and select Generate, then Select the Synthesis box for generation.
AR# 51066
Date 06/18/2018
Status Active
Type General Article
  • PlanAhead
Page Bookmarked