We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 51110

ZC702 - XADC_VCC5V0 jumper setting to enable Analog Mixed Signal evaluation


What is the correct jumper setting for J65 on the ZC702 board to enable Analog Mixed Signal evaluation?


ZC702 documentation (UG926 - Zynq-7000 ZC702 Getting Started Guide (v1.2); UG850 - ZC702 Board User Guide (v1.0) as well as UG886 - AMS101 Evaluation Card User Guide (v1.0)) list the jumper settings on the ZC702 board to enable AMS evaluation.

Jumper setting for J65 (XADC_VCC5V0) is listed as "Not in Place".  This should read J65: In Place.

The J65 jumper needs to be in place to enable AMS evaluation.

The next versions of UG926, UG886 and UG850 will be updated to reflect the correct J65 jumper setting.

Linked Answer Records

Master Answer Records

AR# 51110
Date 05/21/2018
Status Active
Type General Article
Boards & Kits
  • Zynq-7000 SoC ZC702 Evaluation Kit
  • AMS101 Evaluation Card
Page Bookmarked