UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 51141

System Generator and PlanAhead 14.1 - When opening an MDL from within a PlanAhead project the device can get reset to default, causing failures

Description

After adding my MDL file into a PlanAhead 14.1 project and trying to generate the MDL, or, alternatively, opening the MDL from within PlanAhead, the following errors occur:

Error using ==> xlMapFamily at 60
xlMapFamily: wrong parameter value pm 2 mask: Spartan-3A DSP
Error in ==>
C:\Xilinx\14.1\ISE_DS\ISE\sysgen\bin\nt\xlpartchoicestring.p>xlpartchoicestring at 3
Error in ==>
C:\Xilinx\14.1\ISE_DS\ISE\sysgen\bin\nt\xlpartchoicechosen.p>xlpartchoicechosen at 14
Error in ==>
C:\Xilinx\14.1\ISE_DS\ISE\sysgen\bin\nt\xlSyncParamsForPA.p>xlSyncParamsForPA at 22
Error in ==>
C:\Xilinx\14.1\ISE_DS\ISE\sysgen\bin\nt\xlGenerateForPA.p>xlGenerateForPA at 30

Solution

This is a known issue in 14.1. It does not occur in PlanAhead 14.2.

Linked Answer Records

Associated Answer Records

AR# 51141
Date Created 08/03/2012
Last Updated 11/28/2012
Status Active
Type General Article
Tools
  • PlanAhead - 14.1
  • System Generator for DSP - 14.1