This section of the MIG 7 Series Design Assistant focuses on Simulation Support for MIG 7 Series designs. Please select from the options below to find information related to your specific question.
NOTE: This article is part of the Xilinx MIG Solution Center (Xilinx Answer 51313). The Xilinx MIG Solution Center is available to address all questions related to MIG. Whether you are starting a new design with MIG or troubleshooting a problem, use the MIG Solution Center to guide you to the right information.
ISE Simulator, Vivado Simulator, and ModelSim simulation tools are used for verification of MIG 7 series designs at each release. Other simulation tools can be used to simulate MIG 7 series designs, but they have not been verified by Xilinx.
For information on how to simulate MIG 7 series designs using VCS simulator, refer to (Xilinx Answer 51178).
For information on how to simulate MIG 7 series designs using NCSIM, refer to (Xilinx Answer 51861).
| Answer Number | Answer Title | Version Found | Version Resolved |
|---|---|---|---|
| 51666 | Xilinx MIG 7 Series Solution Center Design Assistant - Simulation | N/A | N/A |
| Answer Number | Answer Title | Version Found | Version Resolved |
|---|---|---|---|
| 51178 | Xilinx MIG 7 Series Design Assistant - Simulating a MIG DDR3 example design using VCS | N/A | N/A |
| 51861 | Xilinx MIG 7 Series Solution Center - Design Assistant - Simulating a MIG DDR3 example design using NCSIM | N/A | N/A |
| AR# 51671 | |
|---|---|
| Date | 09/18/2012 |
| Status | Active |
| Type | Solution Center |
| Devices | |
| IP | |